Maintaining Car Wash Blow Dryers

Jordan Fletcher
Jordan Fletcher
• 1 min read
Car wash maintenance should include checking your blow dryers and their motors on a regular basis to keep them performing at optimum levels.
  • Stress Cracks:  Visually inspect each motor and fan, and look for visible stress cracks in impellers.
  • Intake Screen:  The intake screen also needs to be checked and cleaned as needed.
  • Impeller Rotation:  Verify the correct rotation of the direction of the impeller. The blower will move approximately 50% less air when the impeller is running backward, plus it will draw excessive amp load.
  • Greasing:  Dryer motors need to be greased annually, so you may want to add this to your annual maintenance checklist.
  • Motor Starter:  We also recommend checking the motor starter overload relay and fuses, if applicable. Verify that the control voltage is correct for the magnetic starter coil.
  • Single Phasing:  If the motor makes a buzzing noise and runs slowly, it may be single phasing.
For more information about proper dryer maintenance, or if you are having a problem, contact D&S for the name of your Authorized D&S Distributor.

Related Posts

Investors

Wiring Basics

Car wash owner/operator duties often include that of a “service technician” as well. When tackling electrical issues, always remember these basic steps: Disconnect breaker before beginning any service. When unplugging a wire, cable, or connector, label it and the contact before it is disconnected so you know where to reconnect. Take a picture of the […]

Tech Tip Center

Inspecting Car Wash Presoak Chemistry

If your car wash presoak is not performing as expected, inspecting your car wash presoak chemistry for water softness, foot valve leakage, and alkalinity level. 1) Ensure the water softener is working properly. Check water hardness. Water softeners can be consuming salt without conditioning water adequately, so it’s important to test water quality. 2) Check the foot valve […]

Tech Tip Center

Winter Car Wash Tips for Operators: Keep Bays Running in Freezing Weather

With winter in full swing in the Northern hemisphere, here are a few tips to keep your car wash equipment and chemicals performing optimally during the cold winter months. Check the functionality of all cold weather related equipment and systems, including: Bay and equipment room heaters Floor heat and related equipment Automatic bay doors Weep systems Blowdown […]