Ensuring Proper Tightness on Binder Connector

Jordan Fletcher
Jordan Fletcher
1 min read

Moisture can ingress into the power connector pins if not tightened properly.  Use Corrosion X HD and tighten the motor power connectors properly to keep moisture out. Use Corrosion X HD and tighten the motor power connectors properly to keep moisture out.

Related Posts

Tech Tip Center

Using the Full Potential of the IQ Car Wash

The full potential of an IQ In Bay Automatic Car Wash System can be realized simply by adding broadband internet access and a standard desktop computer to the control room of your car wash. Using these communication tools, you can take advantage of the IQ’s Email Notification and Remote Access functionalities to maximize uptime and […]

Tech Tip Center

Inspecting Car Wash Presoak Chemistry

If your car wash presoak is not performing as expected, inspecting your car wash presoak chemistry for water softness, foot valve leakage, and alkalinity level. 1) Ensure the water softener is working properly. Check water hardness. Water softeners can be consuming salt without conditioning water adequately, so it’s important to test water quality. 2) Check the foot valve […]

Tech Tip Center

Maintaining Car Wash Blow Dryers

Car wash maintenance should include checking your blow dryers and their motors on a regular basis to keep them performing at optimum levels. Stress Cracks:  Visually inspect each motor and fan, and look for visible stress cracks in impellers. Intake Screen:  The intake screen also needs to be checked and cleaned as needed. Impeller Rotation:  Verify […]